8
JAT-750/751/752 Mini Belt Sanders
Figure 2
JAT-751:
Insert hex wrench into hex socket cap screw and
turn clockwise or counterclockwise until belt is
centered on idle pulley. See Figure 4.
Figure 3
Belt replacement
JAT-750:
1.
Disconnect sander from air source.
2.
Loosen hex cap screw (See Figure 1), turn
arm 90-degrees to the handle, and tighten
screw to lock.
3.
Steady sander with one hand while pushing
down on the idle wheel with other hand, until
assembly locks in place. See Figure 4.
4.
Remove old belt. Install new belt, centering it
on the pulleys.
5.
Press tension lever (A, Figure 4) to engage
tension.
Figure 4: JAT-750
JAT-751:
1.
Disconnect sander from air source.
2.
Loosen hex cap screw (see Figure 1), turn
head 90-degrees to the handle, and tighten
screw to lock.
3.
Steady sander with one hand, while pushing
down on idle pulley assembly and removing
belt.
4.
Install new belt over pulleys.
5.
Release pressure on idle pulley to tension
belt.
Figure 5: JAT-751
JAT-752:
1.
Disconnect sander from air source.
2.
Loosen hex cap screw (see Figure 1), turn
head 90-degrees to the handle, and tighten
screw to lock.
