background image

JET   

 

24.  Keep  visitors  a  safe  distance  from  the  work 

area. 

Keep children away.

 

25.  Give  your  work  undivided  attention.  Looking 

around,  carrying  on  a  conversation  and 
“horse-play” are careless acts that can result 
in serious injury. 

26.  Do not force a tool or attachment to do a job 

for  which  it  was  not  designed.  The  right  tool 
will do the job better and more safely. 

27.  Repetitive  motions  and/or  exposure  to 

constant  vibration  can  be  harmful  to  hands 
and  arms.  Take  frequent  breaks  and  relax 
hands  during  extended  operation.  Change 
posture to avoid discomfort or fatigue. 

28.  Compressed  air  can  be  harmful  if  directed 

toward sensitive areas of the body, and may 
propel small particles caught in the air stream. 
Exercise proper caution. 

29.  Use 

only 

recommended 

accessories; 

improper accessories may be hazardous. 

30.  Maintain  tools  with  care.  Keep  air  tool  clean 

and oiled for best and safest performance. 

31.  Do  not  use  combustible  gases,  carbon 

dioxide, oxygen  or any bottled gas as an air 
source for the tool. These can present risk of 
explosion and serious injury. 

32.  Do  not  lubricate  the  tool  with  combustible 

liquids, such as kerosene, diesel or jet fuel. 

33.  Do  not  dispose  of  this  tool  with  normal 

household waste. Never dispose of the air tool 
into fire. 

Specific warnings for Impact Wrench 

34.  This impact wrench is designed for removing 

and  installing  threaded  fasteners.  If  you  are 
not familiar with the proper and safe operation 
of a pneumatic impact wrench, do not use until 
proper  training  and  knowledge  have  been 
obtained. 

35.  Use  only  impact  sockets  in  good  condition. 

Sockets in poor condition may reduce impact 
power,  and  could  break,  creating  a  safety 
hazard.  

36.  Use  only  sockets  designated  for  use  with 

impact  wrenches.  Never  use  hand  tool 
sockets, as they can shatter. 

37.  Never  hold  socket,  drive  or  drive  extension 

with your hand during operation. 

38.  Make  sure  workpiece  is  secure  and  will  not 

shift  while  operating  impact  wrench.  Do  not 
hold workpieces with your hand. 

39.  Make  sure  fastener  can  withstand  rated 

torque of impact wrench. 

 

 

Familiarize  yourself  with  the  following  safety 
notices used in this manual: 

 

This means that if precautions 

are not heeded, it may result in serious, or even 
fatal, injury.

 

  

This means that if precautions 

are  not  heeded,  it  may  result  in  minor  injury 
and/or possible tool damage.

 

 

 

WARNING:

 This product can expose you 

to chemicals including lead which is known to 
the  State  of  California  to  cause  cancer  and 
birth  defects  or  other  reproductive  harm.  For 
more 

information 

go 

to 

http://www. 

p65warnings.ca. gov. 

 

WARNING:

 Some dust, fumes and gases 

created  by  power  sanding,  sawing,  grinding, 
drilling,  welding  and  other  construction 
activities contain chemicals known to the State 
of California to cause cancer and birth defects 
or other reproductive harm. Some examples of 
these chemicals are: 

  lead from lead based paint 

  crystalline  silica  from  bricks,  cement  and 

other masonry products 

  arsenic  and  chromium  from  chemically 

treated lumber 

Your  risk  of  exposure  varies,  depending  on 
how often you do this type of work. To reduce 
your  exposure  to  these  chemicals,  work  in  a 
well-ventilated  area  and  work  with  approved 
safety equipment, such as dust masks that are 
specifically  designed  to  filter  out  microscopic 
particles.  For  more  information  go  to 
http://www.p65warnings.ca.gov/  and  http:// 
www.p65warnings.ca.gov/wood. 

Содержание JAT-103

















Отзывы: