Jet HBS-1321W WMH, Руководство по эксплуатации и каталог запасных частей

Страница: 3 / 24

WARNING
•
Read and understand the entire instruction manual before attempting assembly or operation.
•
All JET bandsaws are designed and intended for use by properly trained and experienced
personnel only. If you are not familiar with the proper and safe operation of a bandsaw, do
not use until proper training and knowledge have been obtained.
•
Always wear approved safety glasses/face shields while using this machine.
•
Make certain the machine is properly grounded.
•
Before operating the machine, remove tie, rings, watches, other jewelry, and roll up sleeves above
the elbows. Remove all loose clothing and confine long hair. Do NOT wear gloves.
•
Keep the floor around the machine clean and free of scrap material, oil and grease.
•
Keep machine guards in place at all times when the machine is in use. If removed for maintenance
purposes, use extreme caution and replace the guards immediately.
•
Do NOT over reach. Maintain a balanced stance at all times so that you do not fall or lean against
blades or other moving parts.
•
Make all machine adjustments or maintenance with the machine unplugged from the power source.
•
Use the right tool. Don't force a tool or attachment to do a job which it was not designed for.
•
Replace warning labels if they become obscured or removed.
•
Make certain the motor switch is in the OFF position before connecting the machine to the power
supply.
•
Give your work undivided attention. Looking around, carrying on a conversation, and "horse-play"
are careless acts that can result in serious injury.
•
Keep visitors a safe distance from the work area.
•
Use recommended accessories; improper accessories may be hazardous.
•
Make a habit of checking to see that keys and adjusting wrenches are removed before turning on the
machine.
•
Always keep hands and fingers away from the blade when the machine is running.
•
Never hand hold the material. Always use the vise and clamp it securely.
•
Keep belt guard, blade guards, and wheel covers in place and in working order.
•
Always provide adequate support for long and heavy material.
•
Use a sharp blade and keep machine clean for best and safest performance.
•
Failure to comply with all of these warnings may cause serious injury.