Jet H3655 Скачать руководство пользователя страница 6

 

 

H.  Battery  is  GOOD  if  voltage  is  at  or  above  volt  readings  shown  on  chart. 

Battery is BAD if voltage drops below volt readings shown on chart. 

 

WARNING 

VARIABLE  LOAD  CARBON  PILE  TESTERS  PRODUCE 
HEAT  WHEN  IN  USE.  CARE  MUST  BE  TAKEN  TO 
ALLOW  SUFFICIENT  TIME  TO  COOL  DOWN  BETWEEN 
TESTS TO AVOID INJURY DUE TO HEAT BUILD UP. 

       
NOTE:  On  vehicles  with  multiple  batteries,  only  one  battery  at  a  time  should  be 

tested. 

 

5. TESTING THE CHARGING SYSTEM (ALTERNATOR & 

REGULATOR TEST) 

A. Connect the tester the same as for battery testing. 
B. Start the engine and allow it to reach normal operating temperature. 
C. Run  engine  at  1200  to  1500RPM. 

CAUTION:

  Stay  clear  of  moving  engine 

parts. Do not turn on the load switch. 

D. Read the voltmeter. A reading in the red band area indicates a problem in the 

charging system that will undercharge a battery; if the meter is beyond the OK 
area, the charging system is likely to overcharge the battery. 

 

6. STARTER MOTOR TEST (12 VOLT VEHICLES) 

This  test  identifies  excessive  starter  current  draw,  which  makes  starting  difficult 
and shortens battery life. Perform battery load test-proceed if battery is GOOD. 

 

ENGINE  MUST  BE  AT  NORMAL  OPERATING  TEMPERATURE  FOR  THIS 
TEST 
 

Отзывы: