JET DRILLING
jettools.com
84
DRILLING
85
jettools.com
JET DRILLING
DRILLING
20" ELECTRONIC VARIABLE SPEED DRILL PRESSES
•
Runs quieter and smoother than a conventional variable speed head
•
230V model can run on single phase power
•
Low maintenance head has less moving parts
•
Incorporates a high-low gear box to maintain low speed torque
•
Chrome molybdenum gears are hardened, ground, and shaved
•
Quiet running and longer life
•
Speed can be adjusted in each range during operation
•
LED spindle RPM readout is conveniently mounted
•
Tapping mode allows instantaneous spindle reversal
•
Easy to read internal depth gauge
•
Extra large emergency stop button adds to safe operation
•
Table can be raised from the front or side
•
Large production table and T-slotted dish-in base
STANDARD EQUIPMENT
•
Integrated tapping and reversing controls
•
Complete coolant system
•
T-slotted work table
20" ELECTRONIC VARIABLE SPEED DRILL PRESSES
OPTIONAL EQUIPMENT
STOCK NUMBER
Vises
See Accessory Section
52 pc. Clamping kit
660058
Drill chucks
See Accessory Section
Drill chuck arbors
See Accessory Section
STOCK NUMBER
354210
354212
Model Number
JDP-20EVS/230
JDP-20EVS/460
Drills to Center of Circle (in.)
20
20
Cast Iron Drilling Capacity (in.)
1-1/2
1-1/2
Steel Drilling Capacity (in.)
1-3/8
1-3/8
Steel Tapping Capacity (in.)
3/4
3/4
Column Diameter (in.)
4-1/2
4-1/2
Distance Spindle to Column (max./in.)
10-7/16
10-7/16
Spindle Taper
MT-3
MT-3
Spindle Travel (in.)
6
6
Number of Spindle Speeds
Variable
Variable
Range of Spindle Speeds (RPM)
65 – 2000
65 – 2000
Distance Spindle to Base (max./in.)
44-1/4
44-1/4
Distance Spindle to Table (max./in.)
32-3/8
32-3/8
Table Size (in.)
22 x 18-3/4
22 x18-3/4
Table Weight (max./lbs.)
230
230
T-slot (Number & Size) (in.)
2 & 5/8
2 & 5/8
T-slot Centers
8-1/2
8-1/2
Main Motor
2HP, 230V, 3Ph
2HP, 460V, 3Ph
Coolant Motor
1/8HP, 3Ph
1/8HP, 3Ph
Floor Space Required (in./L x W x H)
37 x 37 x 82-1/4
37 x 37 x 82-1/4
Net Weight (lbs.)
722
722
