3
Warnings
1. For your own safety read instruction manual before operating grinder.
2. Read and understand the entire owner’s manual before attempting assembly or operation.
3. Read and understand the warnings posted on the machine and in this manual. Failure to comply with
all of these warnings may cause serious injury.
4. This hand brake is designed and intended for use by properly trained and experienced personnel
only. If you are not familiar with the proper and safe operation of a hand brake, do not use until proper
training and knowledge have been obtained.
5. Do not exceed the rated capacity on this hand brake.
6. Do not use this hand brake for other than its intended use. If used for other purposes, Walter Meier
(Manufacturing) Inc., disclaims any real or implied warranty and holds itself harmless from any injury
that may result from that use.
7. Wear eye protection and always use guards and eye shields.
8. Always wear approved safety glasses/face shields while using this bench grinder. Everyday
eyeglasses only have impact resistant lenses; they are not safety glasses.
9. Before operating this bench grinder, remove tie, rings, watches and other jewelry, and roll sleeves up
past the elbows. Remove all loose clothing and confine long hair. Non-slip footwear or anti-skid floor
strips are recommended. Do
not
wear gloves.
10. Wear ear protectors (plugs or muffs) during extended periods of operation.
11. Some dust created by power sanding, sawing, grinding, drilling and other construction activities
contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples
of these chemicals are:
•
Lead from lead based paint.
•
Crystalline silica from bricks, cement and other masonry products.
•
Arsenic and chromium from chemically treated lumber.
Your risk of exposure varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area and work with approved safety
equipment, such as face or dust masks that are specifically designed to filter out microscopic
particles.
12. Do not operate this machine while tired or under the influence of drugs, alcohol or any medication.
13. KEEP GUARDS IN PLACE and in working order at all times when the machine is in use. If removed
for maintenance purposes, use extreme caution and replace the guards immediately.
14. Make sure the hand brake is firmly secured to the floor before use.
15. Check damaged parts. Before further use of the machine, a guard or other part that is damaged
should be carefully checked to determine that it will operate properly and perform its intended
function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting
and any other conditions that may affect its operation. A guard or other part that is damaged should
be properly repaired or replaced.
16.
SHEET METAL STOCK HAS SHARP EDGES.
To prevent cuts, use caution when handling.
17.
KEEP HANDS AND FINGERS
clear of the area in front and rear of the brake.
18. Provide for adequate space surrounding work area and non-glare, overhead lighting.
19. Make your workshop child proof with padlocks, master switches or by removing starter keys.
20. Keep visitors a safe distance from the work area.
Keep children away.
Содержание BP-1696H
Страница 7: ...7 Assembly Drawing ...
