Jet BGC SERIES, Руководство оператора

Страница: 10 / 12

DESCRIPTION MAXIMUM SAFE SPEED
GRINDING WHEELS
1/2" Face, 6" dia. 60 Grit Medium Grinding Wheel 3,825RPM
5/8" Face, 6" dia. 60 Grit Medium and 36 Grit Coarse Grinding Wheel 4,136RPM
3/4" Face, 6" dia. 60 Grit Medium Grinding Wheel 4,136RPM
3/4" Face, 8" dia. 60 Grit Medium and 36 Grit Coarse Grinding Wheel 3,600RPM
1" Face, 8" dia. 60 Grit Medium and 36 Grit Coarse Wheel 3,600RPM
When using electrical tools please follow basic safety requirements for your own safe-
ty and also to reduce risk of fire and electric shock.
PLEASE READ YOUR INSTRUCTION MANUAL CAREFULLY BEFORE
BEGINNING OPERATION.
EXTENSION CORDS:
USE PROPER EXTENSION CORD. Make sure your extension cord is in good con-
dition. When using an extension cord, be sure to use one heavy enough to carry the
current your products will draw. An undersized cord will cause a drop in line voltage
resulting in loss of power and overheating. Table noted below, shows the correct size
to use depending on cord length and nameplate ampere rating. If in doubt, use the
next heavier gauge. The smaller the gauge number, the heavier the cord.
Minimum gauge for cord
Volts Total length of cord in feet
120V 25 ft. 50 ft. 100 ft. 150 ft.
Ampere Rating
Not
More More
Than Than AWG
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not Recommended
OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only exten-
sion cords intended for use outdoors and so marked.
STAY ALERT. Watch what you are doing. Use common sense. Do not operate tool
when you are tired.
CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that
is damaged should be carefully checked to determine that it will operate properly and
perform its intended function. Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any other conditions that may affect its opera-
tion. A guard or other part that is damaged should be properly repaired or replaced by
an authorized service center unless otherwise indicated elsewhere in this instruction
manual. Have defective switches replaced by authorized service center. Do not use
tool if switch does not turn tool on and off.