Jet BDB-1340A, Руководство пользователя

Страница: 14 / 20

14
11. Longitudinal Traverse Hand Wheel (A,
Fig. 14) - Rotate hand wheel clockwise to
move the apron assembly toward the
tailstock (right). Rotate the wheel counter-
clockwise to move the apron assembly
toward the headstock (left).
12. Feed Selector (B, Fig. 14) - Push lever to
the left and down to activate the crossfeed
function. Pull lever to the right and up to
activate the longitudinal function.
13. Half Nut Engage Lever (thread cutting)
(C, Fig. 14) - Move the lever down to
engage. Move the lever up to disengage.
14. Cross Traverse Handwheel (D, Fig. 14) -
Clockwise rotation moves the cross slide
toward the rear of the machine.
15. Compound Rest Traverse Handwheel (E,
Fig. 14) - Rotate clockwise or counter-
clockwise to move or position.
16. Tool Post Clamping Lever (F, Fig. 14) -
Rotate counter-clockwise to loosen and
clockwise to tighten. Rotate the tool post
when the lever is unlocked.
17. Threading Dial (G, Fig. 14) - Engage by
pushing into the leadscrew. Pull out to
disengage. The dial indicator and chart will
specify at which point a thread can be
entered.
18. Tailstock Quill Clamping Lever (H, Fig.
15) - Lift up to lock the spindle. Push down
to unlock.
19. Tailstock Clamping Lever (I, Fig. 15) - Lift
up lever to lock. Push down lever to unlock.
20. Tailstock Quill Traverse Handwheel (J,
Fig. 15) - Rotate clockwise to advance the
quill. Rotate counter-clockwise to retract the
quill.
21. Tailstock Off-Set Adjustment (K, Fig. 15) -
Three set screws located on the tailstock
base are used to off-set the tailstock for
cutting tapers. Loosen lock screw on
tailstock end. Loosen one side set screw
(K, Fig. 15) while tightening the other until
the amount of off-set is indicated on scale.
Tighten lock screw.