background image

 

26. Do not use this dust collector to pick up 

flammable or combustible liquids, and do not 
use it in explosive environments. 

27. Do not use without dust bag and/or filter in 

place. 

28. Do not use the dust collector to dissipate 

fumes or smoke. Never pick up anything that 
is burning or smoking, such as cigarettes, 
matches, or hot ashes.  

29. Do not insert fingers or foreign objects into 

the inlet ports. Keep hair, loose clothing, and 
all body parts away from openings and 
moving parts of the dust collector. 

30. Do not unplug the machine by pulling on the 

power cord – grasp the plug, not the cord. 

31. Do not pull the machine by the power cord, 

or allow the power cord to contact sharp 
edges or hot surfaces. Replace a damaged 
cord immediately. 

32. Never mix ferrous and non-ferrous metal 

dust in the same dust collector. If you are 
not familiar with the proper and safe usage 
of metal dust collection systems do not use 
until proper training has been obtained. 

 

 

Familiarize yourself with the following safety notices used in this manual: 

 This means that if precautions are not heeded, it may result in minor injury and/or 

possible machine damage. 

 This means that if precautions are not heeded, it may result in serious injury or possibly 

even death. 

 

 

 

SAVE THESE INSTRUCTIONS 

 

 

WARNING:

 Some dust, fumes and gases 

created by power sanding, sawing, grinding, drilling, 
welding and other construction activities contain 
chemicals known to the State of California to cause 
cancer and birth defects or other reproductive harm. 
Some examples of these chemicals are: 

  lead from lead based paint 

  crystalline silica from bricks, cement and other 

masonry products 

  arsenic and chromium from chemically treated 

lumber 

Your risk of exposure varies, depending on how 
often you do this type of work. To reduce your 
exposure to these chemicals, work in a well-
ventilated area and work with approved safety 
equipment, such as dust masks that are specifically 
designed to filter out microscopic particles. For more 
information go to http://www.p65warnings.ca.gov/ 
and http:// www.p65warnings.ca.gov/wood. 

 

WARNING:

 This product can expose you to 

chemicals including lead which is known to the 
State of California to cause cancer and birth defects 
or other reproductive harm. For more information go 
to http://www.p65warnings.ca.gov. 

Содержание 414900













Отзывы: