6
Introduction
This manual is provided by JET covering the safe operation and maintenance procedures for a Model 10-
20 Plus Drum Sander. This manual contains instructions on installation, safety precautions, general
operating procedures, maintenance instructions and parts breakdown. This machine has been designed
and constructed to provide years of trouble free operation if used in accordance to instructions set forth in
this manual. If there are any questions or comments, please contact either your local supplier or Walter
Meier (Manufacturing) Inc. Walter Meier can also be reached at our web site: www.waltermeier.com.
Specifications
Model Number ......................................................................................................................10-20 Plus
Stock Number .......................................................................................................................... 628900
Maximum Width (in) .....................................................................................................20 (Two Passes)
Minimum Length (in) ..................................................................................................................... 2-1/4
Maximum Thickness (in) ..................................................................................................................... 3
Minimum Thickness (in) ................................................................................................................. 1/32
Drum (in) ...................................................................................................... 5 x 10 Extruded Aluminum
Drum Speed (RPM) ...................................................................................................................... 1700
Dust Chute (in) ................................................................................................................................... 4
Conveyor Motor .............................................................................. 43 inch-lb Torque, Direct Drive, D.C.
Conveyor Variable Feed Rate (FPM) .............................................................................................. 0-12
Motor (TEFC) ....................................................................................................... 1 HP, 1Ph, 115V only
Net Weight (lbs) ................................................................................................................................ 96
The specifications in this manual are given as general information and are not binding. Walter Meier
reserves the right to effect, at any time and without prior notice, changes or alterations to parts, fittings,
and accessory equipment deemed necessary for any reason whatsoever.
Read and understand the entire contents of this manual before attempting
assembly or operation! Failure to comply may cause serious injury
Содержание 10 Plus
Страница 22: ...22 Assembly Drawing...
