Portable Steam Cleaner
7
Flat Sprayer Installation
Insert the Brush Sprayer into the short sprayer; follow the directions as shown in Figures 4 and 5.
Adding Water
1. Disconnect the plug first to cut off the electricity.
2. Press the steam button to release pressure until no steam is coming out.
3. Open the safety cover slightly; release the remaining steam, then place the steam cleaner in a cool place for
five minutes. Open the safety cover fully.
4. Use the funnel and measuring cup to add some cool or warm water.
5. Put the safety cover back and screw it tightly.
After Using
1. Disconnect the plug first to cut off the electricity.
2. Press the steam button to release the remaining steam.
3. Open the safety cover slightly; release the remaining steam, then place the steam cleaner in a cool place for
five minutes. Open the safety cover fully.
4. Let the remaining water in the tank evaporate, then clean the surface of the steam cleaner.
5. Put the safety cover back and screw it tightly.
NOTE
:
1. The indicator light will turn on when the electricity is still switched on.
2. Please screw the safety cover back tightly.