20
OPERATING INSTRUCTION
•
Plug the patio heater into a grounded 220-240V, 10 AMP power outlet in
a safe and dry area.
•
Der ON/OFF-Schalter verbindet und trennt die Stromversorgung
“O” means that the device is off, “I” means standby mode
Remote Control
A. To operate the heater with 500W,
press the button
I
.
B. To operate the heater with 1000W,
press the button
II
.
C. To operate the heater with 1500W,
press the button
III
.
D. To turn off all functions, press OFF.
Care and maintenance
Disconnect the device from electrical supply and give it time to fully cool off.
•
To keep the heater clean, please wipe its surface with a clean, damp cloth. If
required, you can also use a mild detergent. Afterwards, rub the heater dry
with a clean cloth
•
Do not use any corrosive or solvent cleansers, no alcohol, petrol, abrasive
cleaner, furniture polish or coarse brush, as these might damage the surface.
•
Although the device is suitable for outdoor use, you should never immerse
it in water for your own safety. Should the heater get wet, please make sure
to wait until it is fully dry before using it again.
•
Maintenance or repair (including replacing the halogen tube) shall only be
carried out by a qualified electrician or a recommended service center.