Jet EQUIPMENT & TOOLS JTJ-10SV, Руководство пользователя

Страница: 4 / 11

4
Operation
To raise the jack:
1. Insert the end of the handle into the release stem.
2. Turn the release stem clockwise completely to close the valve. Do not over tighten.
3. Insert the handle into the handle socket.
4. Pump the handle to raise the load.
To lower the jack:
1. Insert the end of the handle into the release stem and turn slowly counter-clockwise to open the
valve.
WARNING
Slowly turn the release valve! Turning the release valve quickly makes the load fall rapidly and
may lead to the loss off the load or damage to the jack!
Failure to comply may cause serious injury and/or property damage!
2. Do not turn the release valve around more than two complete revolutions.
3. When storing the jack, retract the ram completely and wipe off any dirt, oil, or other contaminants.
Lubrication
•
Lubricate the pins with a few drops of machine tool oil monthly.
•
Lubricate the slide with #2 lithium based grease monthly.