5
GAIN: Adjust the amount of gain (distortion) that the amplifier produces.
Keep it low for clean tones, or dial it up for some tube grit.
BASS: Part of the 3-band EQ for adjusting low frequencies
MID: Part of the 3-band EQ for adjusting middle frequencies
HIGH: Part of the 3-band EQ for adjusting middle frequencies
MASTER: will let you adjust how loud the output will be.
PRESENCE: adds an overall brightness, which can be handy when trying to
cut through in a ‘dead’ room.
DEPTH: enhances the amplifier’s low-end frequencies to give extra
heaviness to your sound.
STANDBY switch: Used in conjunction with the main POWER switch. Use
the STANDBY to “warm up” your amp’s tubes before turning on the POWER
switch.
Always put the amp in STANDBY before turning the main power
switch on or off.
POWER switch: This is the main power switch for the entire amp.
Be sure
that your amp is switched off AND unplugged before moving it.
