To unlock the controls
1. Make sure the heating zone is turned on.
2. Pressing the "-"key and "+"key at the same time
for a while.
3. You can now start using the heating zone.
When the heating zone in the lock mode, all the controls are disable except the
ON/OFF and Pause ,you can always turn the ceramic hob off with the ON/OFF
control in an emergency, but you shall unlock the hob first in the next operation.
Starting the STOP&GO (Pause control)
The function sets all cooking zones that operate to a keep warm setting.
• Touch to stop the heating zone,will show “11”. The heat setting that you set
before comes on. It does not stop the timer function.
• Touch to this function again. The hob will come back to work.
Over-Temperature Protection
A sensor installed in the hob continuously measures the temperature on the hob
surface. If an excessively high temperature is detected, the hob will be
automatically switched off.
When the temperature on the hob surface returns to normal, the ceramic hob
becomes operational again.
Residual Heat Warning
When the hob has been operating for some time, there will be some residual
heat. The letter “ H ”appears to warn you to keep away from it.
Auto Shutdown
Another safety feature of the hob is auto shut down. This occurs whenever you
forget to switch off a cooking zone. The default shutdown times are shown in
the table below:
Power level
1
2
3
4
5
6
7
8
9
Default working timer (hour)
8
8
8
4
4
4
2
2
2
9