background image

2

JESSEM TOOL COMPANY - LIMITED WARRANTY  WARRANTY LIMITATIONS

MESSAGE TO OUR CUSTOMERS

CONTINUOUS PRODUCT IMPROVEMENT POLICY

All JessEm products are warranted to be free from 

defects in material and workmanship. JessEm will 

repair or replace any product which upon inspection, 

proves to be defective for a period of (1) year from 

dated receipt and proof of purchase from an autho-

rized JessEm Distributor. All warranty claims should 

be made direct to JessEm Tool Company.

This warranty does not cover:

•  Repairs or alterations made or attempted by anyone  

other than JessEm Tool Company or an authorized 

     JessEm  service professional.

•  Normal wear and tear.

•  Abuse, misuse or neglect.

Contact JessEm for a warranty claim return autho-

rization and instructions to proceed. The consumer 

is responsible for shipping costs to return product to 

JessEm Tool Company. We will repair or replace the 

product at our discretion and JessEm Tool will return 

shipment to you at no charge.

•  Improper care or maintenance.

•  Continued use after partial failure.

•  Products that have been modified in any way.

•  Products used with improper accessories

Thank you for choosing the Mast-R-Fence III router table fence Model: #04400 from JessEm Tool Company. 

We appreciate your support and hope that our product serves you well. This product is designed to provide 

many years of reliable service, provided it is used as intended and taken care of.

IMPORTANT

Read and understand the contents of

this manual before assembly or

operation of this product

This user manual will assist you in assembly and general operation of this product. It is not our intent to 

teach you about woodworking. It is assumed that you are an experienced woodworker with the basic skills 

and experience necessary to use this product safely. If after reading the following instructions, you are un-

sure or uncomfortable about safely using this product, we urge you to seek additional information through 

widely available woodworking books or classes.

As part of our Continuous Product Improvement Policy, JessEm products are always advancing in design, 

quality and function. Therefore, there may be differences between what is shown in our catalogs, on our 

website, on retail displays and what is sold at time of purchase. We reserve the right to make positive 

changes to our products at our discretion to ensure you, the customer, have the very best product.

State of California:            

WARNING 

Cancer and Reproductive Harm. 

www.P65Warnings.ca.gov

!

!

Содержание MAST-R-FENCE III















Отзывы: