JessEm.com FOR TECHNICAL SUPPORT CALL
1-800-436-6799
Pa
ge
4
Note:
this product has been designed to be
used with the JessEm Mite-R-Excel II.
HOW TO USE
1.
Loosen the adjustment lock knob and
turn the adjustment knob until the stop
is located roughly in the middle of its
range of motion. Retighten the
adjustment lock knob and turn the
adjustment sleeve until it is zeroed in
its current position. This will allow you
to adjust the stop in either direction if
required.
2.
Loosen the plastic adjustable handle
and slide the Micro Adjuster until the
right-hand side of the upper flip stop is
aligned with the desired cut length.
3.
Using a scrap piece of wood, make a
cut and check the length. If the length
is off, loosen the adjustment lock knob
and turn the adjustment knob to
change the length. Use the scale on the
adjustment sleeve to adjust by the
correct amount. Turning the
adjustment knob clockwise will
lengthen the cut while counter
clockwise will shorten it. Ensure the
adjustment lock knob is retightened
before making another cut.
4.
When not in use, simply flip the stop
out of the way to use the miter gauge
without obstruction.
