Thank you for choosing this product from JessEm Tool Company. We appreciate your support and hope that our
product serves you well. This product is designed to provide many years of reliable service provided it is used as
intended and taken care of.
This user manual will assist you in assembly and general operation of this product. It is not our intent to teach
you about woodworking. It is assumed that you are an experienced woodworker with the basic skills and
experience necessary to use this product safely. If after reading the following instructions, if you are unsure or
uncomfortable about safely using this product we urge you to seek additional information through widely
available woodworking books or classes.
As part of our Continuous Product Improvement Policy, JessEm products are always advancing in design and
function. Therefore there may be differences between what is shown in our catalogs, website or at retail display
and what is sold at time of purchase. We reserve the right to make positive changes to our products at our
discretion.
IMPORTANT!
Read and understand the contents of this manual
before assembly or operation of this product.
IMPORTANT SAFETY PRECAUTIONS
!
!
!
Do not wear loose clothing or jewelry that may catch on tools, machinery or equipment.
!
Always wear eye protection in compliance with ANSI safety standards when operating any power tools or
machinery.
If you do not have a manual, contact the manufacturer and obtain one before using any tool or machine.
Before operating any machinery or power tool, read and understand all safety instructions in the owner’s
manual for the tool or machine.
DO NOT OPERATE ROUTER TABLE WITH CASTERS ENGAGED
ALWAYS HAVE THE LEG LEVELLERS ON THE FLOOR WHEN OPERATING THE ROUTER TABLE.
Unplug the tool or machine when mounting or making any adjustments to mechanical performance.
!
Always use proper guards and safety devices when operating power tools and machinery.
!
!
!
ROUTER SAFETY PRECAUTIONS
!
!
!
!
!
!
Always make sure the fence on your router table is locked firmly into position before each use.
Never force the bit or overload the router beyond the expectations of the tool.
Be sure that at least 3/4 of the shank length is inserted securely in the router collet.
Never bottom out the bit in the collet. Allow 1/8” clearance between bottom of shank and bottom of collet.
Always rout in two or more passes when large amounts of stock must be removed.
Use reduced RPM speeds for larger diameter router bits.
Carefully check router bits before each use. Do not use if damage or defect is suspected.
Do not exceed the recommended RPM for any router bit.
