JessEm 04550 Скачать руководство пользователя страница 2

Страница: 2 / 11

Thank you for choosing this product from JessEm Tool Company. We appreciate your

support and hope that our product serves you well. This product is designed to provide

many years of reliable service provided it is used as intended and taken care of.

This user manual will assist you in assembly and general operation of this product. It is

not our intent to teach you about woodworking. It is assumed that you are an experienced

woodworker with the basic skills and experience necessary to use this product safely.

After reading the following instructions, if you are unsure or uncomfortable about safely

using this product we urge you to seek additional information through widely available

woodworking books or classes.

As part of our Continuous Product Improvement Policy, JessEm products are always

advancing in design and function. Therefore there may be differences between what is

shown in our catalogs, website or at retail display and what is sold at time of purchase.

We reserve the right to make positive changes to our products at our discretion.

State of California:

WARNING

Cancer and Reproductive Harm. www.P65Warnings.ca.gov

Содержание 04550









