10
Step 9:
Continued
a.
Attach the guard (part #2) to the guard mount (part #9) using
the (2) guard height adjustment knobs (part #1).
b.
To adjust the height of the guard during use, loosen the guard
height adjustment knobs and slide the guard to the desired
height; then re-tighten.
9
2
1
Figure 15
Attaching the guard:
Step 10:
Loosen the (4) fence face clamping knobs (part #22). See figure 16.
Step 11:
To avoid damaging the wooden fence faces, slide to desired width so your fence faces
completely clear your router bit. Re-tighten the (4) fence face clamping knobs to clamp the fence
faces in place. See Figure 16.
22
22
22
22
Figure 16
ADJUSTING THE WOODEN FENCE FACE (PART #37) ON THE MAST-R-FENCE III
CAUTION
ENSURE THE FENCE FACES COMPLETELY CLEAR THE
DIAMETER OF THE ROUTER BIT BEFORE STARTING THE ROUTER.
!
2
1
9
22
22
22
22
