JessEm Tool 08350 Скачать руководство пользователя страница 10

Страница: 10 / 12

JESSEM TOOL LIMITED WARRANTY

● Repairs or alterations made or attempted by anyone

other than JessEm Tool

Company or an authorized JessEm service professional

● Normal wear and tear.

● Abuse, misuse or neglect.

● Improper care or maintenance.

● Continued use after partial failure.

● Products that have been modified in any

way.

● Products used with improper accessories.
● Premature thread wear due to adjusting

height with

electric or cordless drill.

All JessEm products are warranted to be free from defects in material and

workmanship. JessEm will repair or replace any product which upon inspection

proves to be defective for a period of (1) year from dated receipt and proof of

purchase. All warranty claims should

be made direct to JessEm Tool Company.

Contact JessEm for a warranty claim return authorization and instructions to

proceed. The consumer is responsible for shipping costs to return product to

JessEm Tool Company. We will repair or replace the product at our discretion

and JessEm Tool will return shipment to you at no charge.

ARRANTY LIMITATIONS

This warranty does not cover:

JessEm Tool Company

Toll Free: 1-866-272-7492

Fax: 705-327-0295

Email: [email protected]

Содержание 08350













Результаты поиска

Содержание 08350

Отзывы:

Похожие инструкции для 08350

Бренды по названию

Популярные бренды

JessEm Tool 08350, Руководство пользователя

Результаты поиска

Содержание 08350

Отзывы:

Похожие инструкции для 08350

Бренды по названию

Популярные бренды