E. Troubleshooting, Care and Maintenance
Please read this owner's manual carefully and follow the
steps described in it. If you still have difficulties, consult the
following table. It will guide you though the most common
problems and their solutions.
Problem
Possible solution
Remote control
dose not work
1. Code of 4642T/R Partnership right?
2. Battery of 4642T enough?
3. If antenna is pulled out or if LED lights
4. Make sure that the receiving antenna not
circle around power cord.
5. If powered by nominal
AC15V.
6. Adjust the length of DC12V power cord
7. Pull out AC15V power reinsert plug
Note:
Clean the outside plastic packaging with a soft cloth
lightly moistened with mild soap and water. Never use
any abrasive scouring powder or solvent.
9
F. Specifications
Remote Transmitter: 4642T
RF Output Power 3dBm
±
3dBm
RF Transmitter Frequency 433.92MHz
Battery 12VDC(GP23A 1PCS)
Transmitter Current 40mA
Maintain Current 40nA
Dimension 95mm
×
48mm
×
28mm
Weight 40g
Rotating Pannier: 4642R
RF Receiver Sensible -80dBm(excel)
RF Receiver frequency 433.92MHz
Auto/Remote scanning angle 370
o
Manual Adjust angle 75
o
Max
Speed of Scanning 50 seconds /change
Max load 650g
Noise (away 30cm unload) Less Than 40db
Power Supply 15VAC 400mA
Output Power 12VDC 200mA
Dimension 100mm
×
100mm
×
100mm
Weight 320 g
System: 4642T and 4642R
Operation temperature range 0
?
~50
?
Remote control range Up to 50meter (line of sight)
•
All specification subject to change without notice
10
