Jesmay Electronics 2036T/R, Руководство пользователя, Страница: 11 / 13

λ
MASTER HDD USED
It shows the space used on the first hard disk drive for recording.
λ
MASTER HDD FORMAT
If you format the hard drive, it will erase all the data recorded on the first
hard disk drive.
λ
SLAVE HDD SIZE
It shows the space the secondary hard disk drive installed in the DVR.
λ
SLAVE HDD USED
It shows the space used on the primary hard disk drive for recording.
λ
SLAVE HDD FORMAT
If you format the hard drive, it will erase all the data recorded on the
secondary hard disk drive.
?
11
Sensor Setup
19
λ
Push the UNLOCK BUTTON to insert the wire
λ
There are 3 different modes for sensor setting:
NOT INSTALLED, NORMAL-CLOSE and NORMAL-OPEN.
It depend on what type external sensor you use, if sensor’s output is
NORMAL-OPEN then select NORMAL-OPEN mode in DVR.
If sensor triggered by an intruder then the cable line connects to DVR input
terminal will notify system to start recording.
There are four pairs of input terminal support by DVR.
Install example diagram
:
20
λ
SENSOR RECORD TIME
The number indicates how long
sensor recording lasts after when
the sensor indicates the
movements in front of the camera.
λ
ALARM OUT TIME
It controls how long (in seconds)
the alarm lasts after it sets off.
Value 0 will turn off alarm output.
Select Cont will turn on alarm
output until user press any key.