SUBJECT TO TECHNICAL CHANGES.
JERGENS INC. · PHONE: 216.486.5540 · FAX: 216.481.6193 /553720 / 553721/
5
INSTALLATION MANUAL
ZPS-
K5.3,
K10.3, K20.3 CLAMPING
MODULE WITH SENSOR
MONITORING, MOUNTING FLANGE
877.426.2504
1.
They must be trained and authorised to safely operate the product, to
feed or interrupt the operating pressure, and to label the equipment
in accordance with the standard safety provisions.
2.
they must be trained in the correct procedure for maintaining and
using the safety equipment in accordance with the standard safety
provisions.
Before commissioning the equipment, the customer is obliged to make
sure:
1.
That the personnel have received, read, and understood the
installation manual;
2.
That the personnel observe the given instructions.
0.2
Trained personnel
MACHINE OPERATOR: One or more persons who, based on appropriate
instructions from the owner of the Zero Point System (ZPS), are assigned
and authorized to operate it and connected devices. Another prerequisite
is the complete knowledge and unrestricted understanding of the contents
of this manual.
0.3
Individual protective equipment
The personnel mentioned in the previous section must wear the
appropriate protective clothing required for the use of the processing
machine on which the Zero Point System (ZPS) is installed.
Safety shoes are required; the need to wear hearing protection, safety
helmets and safety goggles must be judged by the operating
company.
The wearing of loose clothing, which could become caught in the
moving machine components, is not permitted.
