- 5 -
●
Before operating the machine, always remove tie, rings, watches and any
loose adornments which might entangle with the rotating machinery.
●
Should the cutter become 'fast' in the workpiece, stop the motor
immediately to prevent personal injury. Disconnect from the power
source and turn arbor to and fro. DO NOT ATTEMPT TO FREE THE
CUTTER BY SWITCHING THE MOTOR ON AND OFF.
●
If the machine is accidentally dropped, always thoroughly examine the
machine for signs of damage and check that it functions correctly before
trying to drill a hole.
●
Regularly inspect the machine and check that nuts and screws are tight.
●
Always ensure when using the machine in an inverted position that only the
minimum amount of coolant is used and that care is taken to ensure that
coolant does not drip on to the motor unit.
●
On completion of the cut, a slug will be ejected. DO NOT operate the
machine if the ejected slug may cause injury.
