Jeppesen Nobeltec Solid State Heading Sensor, Руководство пользователя

Страница: 13 / 48

INSTALLATION
Jeppesen Marine
7
The individual wires found within the cable have the following color-coding:
Table 1 – NMEA 0183 Cable/Wire Color Coding
Tip:
The specifications in Table 1 were designed using a SeaLevel
®
Serial-to-USB
port adapter, available from any authorized Nobeltec retailer. Other devices may use
different terminology.
Connecting to an NMEA 2000 Interface
The SSHS connects to an NMEA 2000 interface through a five pin male connector using an
NMEA 2000 cable. Connect the female end of the NMEA 2000 cable to the male connector on
the SSHS (note the key on the connectors in
Figure 7
).
Ensure that the cable is connected securely, and that the collar on the cable connector is
firmly tightened. Connect the other (male) end of the cable to the NMEA 2000 network in the
same manner. The SSHS is designed to allow you to plug into or unplug from an NMEA 2000
network while the network is powered on or off.
Tip:
Always follow recommended practices for installing NMEA 2000 network
products. Jeppesen Marine does not provide technical support for the NMEA 2000
interface as of this printing.
Wire Color Name Description
Black
V- Ground Connection
Red
V+ 12 Volt Power Supply
Gray
TXA Transmit Differential Output A Signal to RXA (-)
Brown
Transmit Differential Output B Signal to RXB (+)
Blue
Transmit Differential Output B Signal to RXB (+)
White
Transmit Differential Output B Signal to RXB (+)