Nobeltec
®
InSight Radar 2 - Black Box (IR2-BB)™
STEP 5: Connect the Power Cable
Route the DC power to the unit via a breaker on the vessel's main or
distribution panel, connecting to the main radar switch/breaker whenever
possible.
Cve to +ve (red wire B+), -ve to –ve (black wire B-). Note that
the cable may be labeled “Ground, 12V”. If this is the case, the ground
should be labeled B- and the +12V labeled B+.
Figure 3.3 - Power Cable
WARNING:
Insure the power connection runs through a circuit breaker
equipped with an on/off switch.
9
C
hapter
3 - i
nStallation
Содержание Nobeltec InSight Radar 2-Black Box
