Jenx Dreama Скачать руководство пользователя страница 25

   

25

Dreama

jenx.com

Maintenance 

& Inspection

Each Jenx product must be checked and inspected in line with the advice given in this IFU.  Failure to com-
plete these regular checks poses a risk to the user. Every year, each product must be thoroughly inspected 
by a person competent to assess faults and able to rectify or out source rectification. The maximum period 
that should elapse between full product inspections is 1 year. After 3 years or from purchase where a product 
is subject to heavy use, this should be increased to six monthly full inspections. For complete peace of mind, 
Jenx Limited offers Product Inspections. Charges apply 

Jenx Limited products are usually assessed for an individual client, therefore the following points must be 
adhered to prior to the re-issuing of any Jenx products.

• 

Check with issuing Therapist that the product is standard and no special  attachments or modifications 
have been made. If modifications have been made: contact Jenx Limited for advice

• 

Check that the product has been fully cleaned, taking into account the condition of the fabric and the 
foam inside

• 

Check that all hand wheels and levers are in good condition and fitted securely

• 

Check the product and any accessories fully for any sign of wear and tear or distortion

• 

Check that all the functions of the product are working correctly e.g. tilt, height adjustment or back 
recline, etc.

• 

Always ensure that the Instruction For Use stays with the product and is passed on to the new user. For 
new sets of instructions please contact our Sales Support Department on 0114 285 3376 or visit www.
jenx.com

• 

If the product is being delivered, always ensure that the product is packed securely

• 

We strongly recommend that all straps and harnesses are replaced with new ones before re-issue. Only 
genuine Jenx parts should be fitted

• 

Check that gas spring levers are not bent. Do not use the product if any levers are bent. Contact Jenx  
Limited to arrange replacement

• 

Check that the product to be re-issued is to the correct specification for the intended new user. Each 
user may require different ranges of accessories

Follow the product log book document, supplied separately. 
Use extra pages if required, extra sheets are available from the Jenx Limited website: www.jenx.com

Содержание Dreama





























Отзывы: