3.23 DATALOGGING
STORING RESULTS
The STORE menu is used to store the displayed readings in any measurement mode. Select the STORE
menu by using the arrow keys and pressing . When the STORE key is pressed the display will show the
main and auxiliary readings, the previous menu options will be replaced by a new set containing the menu
option ABORT NN (NN is the first available free location of the displayed reading).
To store the displayed reading at the current index number the key should be pressed. If no key is
pressed within 5 seconds the reading will be automatically stored in this location. The instrument will then
return to the previously selected mode. If the reading is not to be stored, moving to the ABORT option using
the arrow keys and pressing will return the instrument to the previously selected mode without storing
the reading. To store a reading in a specific location use the arrow keys to select the required location and
press . If no other key is pressed within 5 seconds the reading will be automatically stored in this location.
The instrument will then return to the previously selected mode.
NOTE:
Automatic storage after 5 seconds is only instigated after the last key press. If a key is
pressed and held down the timer is disabled until the key is released. At this stage the
5 second timer is re-initialised.
The non-volatile storage area has the facility to store 100 readings. If, however, an attempt is made to store
a reading with all locations full, the highlighted message MEMORY FULL will be displayed , returning the
highlighting to the ABORT option. If it is necessary to store the reading the location will have to be selected
within the index option using the arrow keys.
NOTE:
Storing a reading when the memory is full will overwrite any previous data stored in
the selected location.
3345/REV A/08-99
36
