Side 7
–
Operating Instructions DIGITAL II Version 2.0
By setting the charge, the metal weight is determined. For the Rhodiumbath a setting of 10 Amin
would be mathematically a deposition of 60 mg (10 Amin x 6 mg / Amin = 60 mg). Please note, these
are purely theoretical values, which may differ from the actual values.
Functions
• 15 programs can be saved
• Display in 4 different languages (GER, ENG, SP, and F) is possible.
For the choice of language
press „OK“ button for 3 sec
• For the standby mode press button “start” for 3 sec
• The programs are flexible installable
15 programs can be used
EF Degreasing
Au Gold
Ag Silver
Rh Rhodium
Ru Ruthenium
Pd Palladium
Pt Platinum
Ni Nickel
Cu Copper
The programs from 1 to 6 are unnamed. For each tank up to 3 programs can be installed.
Approach to programming
1. Turn on main switch
2. Press button „progr“
3. Select with the rotary switch the desired program
4. Confirm with “ok” button
5. Now enter the working parameters. Press the respective button (time, voltage, etc. see below) and
select the value using the rotary switch. The entries in each case confirm with
"ok":
„Temp“ Temperature (if the bath must be heated)
„Volt“ Voltage
„Time“ Choose between minute and second (or choose charge see above)
If no time is entered permanent mode is chosen automatically.
6. When all values are entered, press butt
on „progr" for 3 seconds to save the settings. The display
shows the previously entered values
7. Press button „save“
8. Confirm with „OK“ and return to the actual values
9. Start the process with „start“
