background image

®

XA2125, XA275, XA250

13

©2001 Recoton Audio Corporation

Recoton Mobile Electronics

A Division of Recoton Audio Corporation

A RECOTON

®

 COMPANY

1090 Emma Oaks Trail

Lake Mary, Florida 32746

®

Limited One Year Warranty–
USA and Canada

Length of Warranty. 

 This warranty from Recoton Mobile

Electronics shall be in effect for a period of one year from
the date of the first consumer purchase.

Persons Protected. 

 This warranty will be enforceable by

the original owner during the warranty period so long as
proof of date of purchase from an authorized Jensen dealer
is presented whenever warranty service is required.

What is Covered. 

 Except as otherwise specified below,

this warranty covers all defects in material and
workmanship in this product. The following are not covered:
damage resulting from accident, misuse, abuse, neglect,
product modification, improper installation, incorrect line
voltage, unauthorized repair or failure to follow instructions
supplied with the product; damage occurring during
shipment (claims must be presented to the carrier);
elimination of car static
or other electrical interferences; any product purchased
outside USA or Canada, or on which the serial number
has been defaced, modified or removed.

How You Can Get Service.

U.S. Purchasers. 

 Please telephone Jensen at

1-800-323-4815. We will either inform you of the name
and address of an authorized Jensen repair station which
will service the product or will advise you to send the
product to a factory service center.

Canadian Purchasers.

  The product should be returned

to the Jensen dealer from whom it was purchased and
such dealer either will service or arrange for service of
the product.

If shipment of the product is required, it should be packed
securely. The original dated bill of sale must always be
included with the product as proof of warranty coverage.

What We Will Pay For.

  We will pay for all labor and

material expenses required to repair the product, but you
must pay any labor costs for the removal and/or installation
of the product. If the product is shipped for warranty
service, you must prepay the initial shipping charges, but
Jensen will pay the return shipping charges if the product is
returned to an address inside the USA or Canada.

Exclusion of Certain Damages. 

 Jensen’s liability is

limited to the repair or replacement, at our option, of any
defective product and shall not include incidental or
consequential economic damages of any kind.

Some states and/or provinces do not allow limitations on
how long an implied warranty lasts and/or do not allow the
exclusion or limitation of incidental or consequential
damages, so the above limitations and exclusions may not
apply to you.

This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state and
province to province.

6236 XA2CH_E.p65

5/7/01, 2:07 PM

13

Содержание XA2125














Отзывы: