7
Note:
When using the Hands-free function, you need to position the unit, so you are facing
the built-in microphone.
Redialing the last number with the speaker
The speaker will automatically redial the last number you have dialed by tapping the speaker
Phone
Button
twice.
Note:
This feature is phone dependent.
Re-linking to the cell phone
If your cell phone is already paired (linked) with the SMPS-610, but became unlinked even
with both Bluetooth devices turned on. You can re-link them by:
1. Turning off the SMPS-610 and then turning it on again to re-link your cell phone.
2. You can also re-link the speaker by using Bluetooth operation of your cell phone. Please
refer to operation manual of your cell phone for more information.
IMPORTANT:
Do not insert an audio cable into the Aux-in Jack while using the Bluetooth
function. This will force the SMPS-610 to disconnect from the Bluetooth enabled device and
you will need to relink your device.
PLAYING MUSIC USING THE AUXILIARY INPUT
The speaker features an auxiliary audio signal input jack for connecting external a
udio
devices like MP3 players, CD players, iPhones or iPods (except iPod shuffle 3
rd
generation)
and listen to them through your the speakers.
1.
Slide the
Bluetooth/MP3 selector
to MP3 position.
2. Use the audio cable (included) with a 3.5 mm stereo plug on each end of the cable.
3. Plug one end into the
Aux-In
Jack
on the SMPS-610 and the other end into the Line-out
Jack or Headphone Jack of your external audio device.
4.
Turn on the SMPS-610, the
Bluetooth Status Indicator
will light in blue.
5. Turn on your external audio device.
6. Press and hold the
V
olume Up (+) / Down (-) Button
on the SMPS-610 to obtain the
desired volume level. Operate all other functions on the external device as usual.
Notes
:
1.
If you are connected to the Line Out Jack of your external device then you only need to
adjust the volume control on the SMPS-610. If you’re connected to the Headphone Jack
of your external device, then you may need to adjust both the volume control of your
external device and the SMPS-610 to obtain the most desirable volume setting.
2. Turn off the SMPS-610 when you have finished listening. Don't forget to switch off the
power of your external device as well.
PLAYING MUSIC FROM A USB FLASH DRIVE OR MICRO SD CARD
1. Slide the
Bluetooth/MP3 selector
to MP3 position.
2.
Insert either a USB Flash Drive into the
USB Port
or a microSD/microSDHC Memory
Card into the microSD
Card Slot
located on the side of SMPS-610.
3.
Turn on the SMPS-610, the
Bluetooth Status Indicator
will light Blue.
4. Compatible audio files on USB Flash Drive or microSD/microSDHC Memory Card will be
automatically played back.
5. Press the
Play/Pause
button
on the unit to play or pause.
6. Press and hold the
Volume Up(+) / Down(-) button
on the SMPS-610 to adjust to the
desired volume level.
7.
Press
the
or
button to skip to previous or next song.
8. Turn off the SMPS-610 when you have finished listening.
Notes:
