E-2
PROTECT YOUR FURNITURE!!
This system is equipped with non-skid rubber ‘feet’ to prevent the product from moving
when you operate the controls. These ‘feet’ are made from non-migrating rubber
material specially formulated to avoid leaving any marks or stains on your furniture.
However certain types of oil based furniture polishes, wood preservatives, or cleaning
sprays may cause the rubber ‘feet’ to soften, and leave marks or a rubber residue on the
furniture. To prevent any damage to your furniture we strongly recommend that you
purchase small self-adhesive felt pads, available at hardware stores and home
improvement centers everywhere, and apply these pads to the bottom of the rubber ‘feet’
before you place the product on fine wooden furniture.
LOCATION OF CONTROLS
1. ON/OFF Volume Control
2. Speakers
3. Power Indicator
4. Battery Door
5. Aux-in Jack
6. Aux-in Cable
GETTING START
Inserting Batteries
1. Remove the Battery Door (#4).
2.
Following the polarity (+ and -) diagram inside the
battery compartment, insert 3 ‘AAA’
size (UM-4)
batteries (not included)
3. Replace the Battery Door (#4)
.
Note : For better performance and longer operating time,
we recommend the use of alkaline-type batteries.
