E-4
GETTING STARTED
POWER SOURCE
This DIGITAL AM/FM STEREO ARMBAND RADIO operates on 2 ‘AAA’ (UM-4)
batteries (not included).
INSTALLING BATTERY
1. Remove the BATTERY DOOR.
2. Following the polarity diagram (+ and -) shown in
the battery compartment (#10), insert 2 'AAA'
(UM-4) batteries (not included).
3. Close the BATTERY DOOR.
Notes:
•
Replace the batteries when the LOW BATTERY INDICATOR (#16) shows on the
LCD display.
•
When changing batteries, the unit will retain the time and your presets for 30
seconds. Change the batteries within this 30 second time frame or you will need to
reset the time and all your saved presets.
•
For better performance and longer operating time, we recommend the use of
alkaline-type batteries
BATTERY WARNING
1. Be sure that the batteries are installed correctly.
Wrong polarity may
damage the
unit.
2. (a) Do not mix old and new batteries.
(b) Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
3. If the unit is not to be used for an extended period of time, remove the batteries.
Old or leaking batteries can cause damage to the unit and may void the warranty.
4. Do not dispose of batteries in fire, batteries may explode or leak.
5. Do not try to recharge batteries not intended to be recharged; they can overheat
and rupture.( Follow battery manufacturer’s directions ).
6. Dispose the old batteries in accordance with the local regulation.
USING THE BELT CLIP
The supplied BELT CLIP allows you to attach the SAB-55B on your belt for
convenient use.
1. Attaching the BELT CLIP
2. Removing the BELT CLIP
