![background image](http://html1.mh-extra.com/html/jensen/nvx200-touchandgo-automotive-gps-receiver/nvx200-touchandgo-automotive-gps-receiver_user-manual_3789798029.webp)
29
4.4.10
Elements of the Active Route
The NVX200 Navigator uses a multi-destination routing system in which you have a
start point (your current location if GPS position is available), a destination, the line of
the active leg of the route, and optionally via points and inactive legs. They are all
shown on the map.
4.4.10.1 The start point, via points and the destination
Flags represent these points.
4.4.10.2 Animated turn guidance
Animated arrows represent all route events other than the above-mentioned special
points. These arrows show the direction in which you need to continue your journey.
4.4.10.3 The active leg of the route
The active leg is the section of the route you are currently driving. If you have not
added any via points, the whole route will be the active leg. When via points are
present, the active leg is the part leading from your location to the next via point.
The active section is displayed in light green when the sun is up, and in red during
the night. In both cases it is the most conspicuous part of the map even when in the
background of a 3D map view.
The line of the route is displayed on the driving side of the road for two-way and on
the axis in case of one-way streets. When the map is zoomed in and the line is wide
enough, small arrows show the direction of the route. This can be useful if you
preview the route before starting the journey or when entering a complex junction.
4.4.10.4 Inactive legs of the route
Future sections of a route are inactive. They are also shown on the map with the
same color but a darker tint than the active one. An inactive route section becomes
active as soon as you reach its starting via point.
4.4.10.5 Roads in the route excluded by your preferences
Although you can choose whether to include or avoid some road types in Route
parameter settings (5.4.4), sometimes they are impossible to avoid near the starting
point, via points or the destination. If so, The NVX200 Navigator will display those
segments of the route with an alternate color. They are shown in red with daylight
colors, and yellow with the night color scheme, both in active and inactive legs of the
route.
Содержание NVX200 - Touch&Go - Automotive GPS Receiver
