Jensen MPR419Q, Инструкция по установке и эксплуатации

Страница: 7 / 18

7 7
OPERATION MPR419Q
Wireless Charging Operation
Step #3
Step #4
Place the smart phone on the wireless
charging pad to begin charging.
Note: LED Indicator for Charging Status
Charging: Flashing Blue
Fully Charged: Solid Blue
Press OPEN to close the wireless
charging pad.
Note: Before retracting the
charging pad, make sure to close
the phone holder. The pad will not
retract if the holder is open.
Step #3
Step #4
Press OPEN to close the wireless
charging pad.
Note: Before retracting the
charging pad, make sure to close
the phone holder. The pad will not
retract if the holder is open.
USB
USB
Step #5
For phones that do not support
wireless charging, insert the
charging cable that came with
your phone into the USB port
and place the phone on the
phone mount pad.
Safety Tip
:
Please remove any pop sockets or cases the have a metal holding ring, as
this will prevent the charging pad from working and may damage the
device. Also, thick or metal cases will prevent the pad from charging the
phone or may cause the phone to overheat. Please use caution.