background image

6

®

MCD 9424JA

Test Speaker Connections

These tests make sure the speakers are connected right. If speakers don’t play at all, both wires
may not be connected. If the wrong speaker plays (you hear front speakers when you expect rear
speakers) make sure you connected the wires right.

 Balance

 Fader

1. Press SEL  four times.

2. Hold the 

VOL

  button until

the display shows BAL.R 15.

Only the right speakers should
be playing. If not, check the
wiring. Make sure you con-
nected the wires just like the
chart on page 6.

5. Press SEL  five times.

6. Hold the 

VOL

 button until

the display shows
FAD.R 15.

Only the rear speakers should
be playing. If not, check the
wiring. Make sure you con-
nected the wires just like the
chart on page 6.

3. Press SEL  four times

again.

4. Hold the 

VOL

 button until

the display shows BAL.L 15.

Only the left speakers should
be playing. If not, check the
wiring. Make sure you con-
nected the wires just like the
chart on page 6.

7. Press SEL  five times again.

8. Hold the 

VOL

 button until

the display shows FAD.F 15.

Only the front speakers should
be playing. If not, check the
wiring. Make sure you con-
nected the wires just like the
chart on page 6.

7

8

5

6

SEL/

VOL

SEL/

VOL

3

4

1

2

SEL/

VOL

SEL/

VOL

Once everything is operating correctly, perform final installation described on page 7.

5448-EIN.p65

7/23/99, 11:39 AM

6

Содержание MCD9424RC - Radio / CD Player



















Отзывы: