5
®
LXA600
Inputs and Controls
Input Wiring
Low Level Input
Use a pair of shielded stereo audio cables with RCA type jacks. Most trunk-mount
amplifier installations require 20-foot RCA cables. Most under-seat and pickup truck
installations use 12-foot cables.
Connect RCA cables from your receiver to the RCA input jacks on the amplifier.
High Level Input
Connect left and right speaker wires coming from radio to high level input plug
as shown.
Inputs may be high level (from the receiver's speaker) or low level (from special low level outputs). Low
level input is preferred for best performance.
POWER
HI INPUT
LOW INPUT
A
A
PROTECT
PASS
HI INPUT
B
B
LOW INPUT
C
C
PASS
D
D
HI INPUT
LOW INPUT
A
A
PASS
HI INPUT
B
B
LOW INPUT
C
C
PASS
D
D
White-Left (+)
White/Black-Left (–)
Gray-Right (+)
Gray/Black-Right (–)
Black (ground)
The power light comes on when
12 volt power is available at both
the b12 volt and RMT wires.
Power Light
The red protect light comes on
when the amplifier shuts down
from overheating or a short circuit
(speaker failure).
Protect Light
Pass Output
Use pass through (PASS) connectors
for adding other amplifiers.
POWER
PROTECT
PASS
Important
Use only the low level or
high level input, do not
use both at one time.
Splice
(as necessary)
6022Eamp.p65
02/08/01, 4:27 PM
5