![background image](http://html1.mh-extra.com/html/jensen/koobrick-wifi/koobrick-wifi_manual_644412012.webp)
KooBrick WiFi Setup
KooBrick WiFi is set up so that you can access the internet without further configuring the
router.
However, in some cases it will be necessary to configure your KooBrick WiFi using the
settings required by your internet provider.
Before following the instructions in this section, you should check whether you have
connected a network cable from the WAN/internet port on your KooBrick WiFi to the correct
port on your broadband modem. This connection is described in the section on "Connecting
your KooBrick WiFi".
If you do not know which port on the broadband modem to use, you must contact your
internet provider.
Make sure that your computer is connected to your KooBrick WiFi, either wirelessly or via a
network cable. Also see the section on "Connecting your computer" in these instructions.
You can easily check whether your KooBrick WiFi has an internet connection by pressing the
button on the front.
-
If this button lights up in blue, your router has internet access.
-
If this button lights up in red, your router does not have internet access.
Follow the instructions below to configure your KooBrick WiFi.
1.
Open your browser (e.g. Internet Explorer or Safari) and type in
the address bar to get access to the KooBrick WiFi menu.
2.
The KooBrick WiFi login page will be shown, and you must enter your username and
password.
a.
Standard username: admin
b.
Standard password: 1234
If you have changed the username and/or password for your KooBrick WiFi, you
must use this/these.