![background image](http://html1.mh-extra.com/html/jensen/jxhdbt1/jxhdbt1_owners-manual_3745072007.webp)
JXHDBT1
5
6.
Press and hold
the Multi-Function button again for two seconds to turn the JXHDBT1 back
on.
7.
Access your first device and choose JXHDBT1 from the list of paired devices. Confirm that
the headphones are paired by pressing the “YES”, “OK” or “answer” button (or other button,
per the device’s instruction manual) to confirm.
8.
Access your second device and choose the JXHDBT1 from the list of paired devices.
Confirm that the headphones are paired by pressing the “YES”, “OK” or “answer” button (or
other button, per the device’s instruction manual) to confirm.
Wearing the Headphones
1.
Before placing the headphones over your ears, please note that the headphones have “L”
for Left and “R” for Right indicators on the inside bottom portion of the headband. It is very
important to place the headphones on your head correctly to get maximum sound benefit
and the most enjoyable listening experience.
2.
Move long hair or clothing out of the way to get a good seal around the ears.
3.
Make sure the volume is turned all the way down.
4.
Select an audio program to play.
5.
Slowly increase the volume level until you find the safe and appropriate listening level.
In-Line Remote Control Function
Controlling Phone Functions
1.
Answer/Hang Up
– During an incoming
call, press the Multi-Function button (1) to
answer the call. Once you have completed
your call, press the Multi-Function button
again to hang up the phone.
2.
Call Rejection
– If you do not want to
answer an incoming call,
press and hold
the
Multi-Function button for approximately two
seconds. You will hear two beeps once you
release the button, indicating the call was
rejected.
3.
Call Waiting
– During a call in progress,
you may answer another incoming call by
pressing the Multi-Function button. This will
place the existing call on hold while you
answer the incoming call. If you want to
switch to the original call, press the Multi-
Function button again. That will place the
second caller on hold while you go back to
your original call. You may repeat again to
go back to the second caller.
4.
Volume Control
– To increase the volume
of your phone, press the
button (2) on the headset. Make sure to increase volume slowly
to prevent damage to your hearing. To decrease the volume on your phone, press the
button (3) on the headset.
2
2
5
4
6
5
3
9
7
Содержание JXHDBT1
Страница 1: ...JXHDBT1 Owner s Manual...
Страница 11: ...JXHDBT1 9...