background image

E6

POWER SOURCE (AC ADAPTOR ONLY)

The JTA-245 is powered by an external AC-DC adaptor with an output of

DC 5V

2A

.

POWER CONNECTION

1.

Connect the cord of the power adaptor to the DC IN JACK (#18) at the back of the unit.

2.

Plug the power adaptor into a household wall socket

PHONO OPERATION

Please Note - Before Use

-

Remove the stylus protector.

-

Be sure that the TONE ARM (#8) is unlocked and free to
move from the TONE ARM REST prior to operating. Lock the
TONE ARM (#8) in place with the TONE ARM LATCH (#5)
when not in use.

1.

Rotate the FUNCTION SELECTOR (#12) to the TAPE/PHONO mode.

2.

Rotate the POWER / VOLUME CONTROL (#13) clockwise to turn on
the unit. The POWER/FUNCTION INDICATOR (#15) will turn on red.

3.

Raise the turntable dust cover.

4.

Place a record on the TURNTABLE PLATTER (#1), use the 45 RPM
ADAPTER (#3) if required.

5.

Set the 33/45/78 RPM SELECTOR (#7) to the proper position
depending on the record to be played.

6.

Lift the TONE ARM (#8) from the tone arm rest by using the TONE ARM LIFT
LEVER (#4) and slowly move it over the record. The TURNTABLE PLATTER
(#1) will start to rotate.

7.

Place the TONE ARM (#8) to the desired position of the record.

8.

Adjust the volume to the desired level.

9.

At the end of record, the platter will automatically stop spinning. Lift the
TONE ARM (#8) from the record and return it to the tone arm rest.

10.

To stop playing manually, lift the TONE ARM (#8) from the record and return
it to the tone arm rest.

NOTES:

The PITCH CONTROL KNOB (#17) allows you to fine tune the playing speed of the record once the correct
speed (33/45/78 RPM) is chosen. Turn the Pitch Control Knob to slightly increase or decrease the speed of the
turntable if necessary.

Certain types of records may have an auto-stop area outside the preset limit, so the turntable may stop before
the last track finishes. If this occurs, set the AUTO STOP ON/OFF SELECTOR (#6) to the “OFF” position. This
allows the record to play to the end, but please note that it will not stop automatically. You must manually raise
the TONE ARM (#8) and place it back in the tone arm rest and then turn off the power to stop the turntable from
spinning.

To play your record on external Bluetooth speakers (not included), see the Bluetooth OUT Operation section.

Содержание JTA-245













Отзывы: