6
HINTS FOR BEST RECEPTION
AM: The unit has built-in AM antenna, to obtain the best reception, you may have to move or
slightly rotate the main unit.
FM: The receiver has a wire antenna located at the rear cabinet. This wire should be totally
unraveled and extended for best reception.
PLAYING PHONO RECORDS
1. Raise the Turntable dust cover.
2. Remove the stylus protector and release the Tone Arm
Clamp.
3. Slide the POWER/FUNCTION
Selector
to select the
PHONO mode.
4. Place a record on the platter, over the central spindle.
5.
Set the Speed Selector Switch to 33, 45 or 78 rpm according to the record you are playing.
Place the 45 RPM adaptor over the central spindle when playing 45 rpm records.
6.
Move the Tone Arm to the beginning of the record or to the start of a particular track. Gently
lower the Tone Arm onto the record to start playing. Adjust the Volume as desired.
7.
The Turntable will stop automatically when the record finishes.
8.
To stop the record before it ends, lift and replace the Tone Arm carefully onto the Tone Arm
Clamp.
AUTO-STOP SWITCH OPERATION
As in some kinds of records, the Auto-Stop area extends beyond the unit setting. As a result
the turntable will stop before the last track finishes. In this case, set the AUTO-STOP Switch
to the “OFF” position, then the turntable will run to the end of the record but will not stop
automatically. To stop the turntable either turn the unit off by setting the POWER/FUNCTION
Selector to the OFF position or setting the AUTO-STOP Switch to the “ON” position. After
stopping the turntable, lift and replace the Tone Arm carefully onto the Tone Arm Clamp.
IMPORTANT:
Moving or jarring the Turntable without securing the Tone Arm Clamp could result in damage
to the Tone Arm.
Cartridge
Stylus assembly
