E13
sudden loud sound bursts from the speaker. Enable the search or scan feature to find the
JSB-550.
Note:
If you have more than one JSB-550 within range, make sure you are connecting to
the appropriate speaker.
3. Select "JSB-550" from the device list when it appears on your device screen. If required,
enter the pass code “0000” to pair (link) the JSB-550 with your cell phone.
4. After successfully pairing (linking) your cell phone with the JSB-550, the Mode Indicator
LED stops flashing and remains lit Turquoise. You can now play music from your cell
phone or Bluetooth device wirelessly to the JSB-550.
Note:
If you want to connect the JSB-550 to another cell phone after pairing
successfully, then you need to turn off the Bluetooth on the paired cell phone first
if it is in range before going through the above steps. Otherwise, the JSB-550 will
automatically reconnect to the previously linked cell phone or device. Then press
and hold the Bluetooth
/PLAY/PAUSE
button to put the JSB-550 into
Bluetooth pairing mode, the LED Indicator will be flashing Turquoise.
5. Press the /- button to adjust the volume level.
6. Press the PLAY/PAUSE
button to pause or resume playback.
7. To turn off the JSB-550 Bluetooth, press and hold the
button on main unit for 2
seconds to turn the unit to standby mode. Mode Indicator LED turns off. Don’t forget to
also turn off the Bluetooth feature on your cell phone or Bluetooth device.
Notes:
1.) Refer to manual of your cell phone or other Bluetooth enabled device for Bluetooth
operation, since it may vary from model to model.
2.) If your Bluetooth enabled device does not support A2DP, it will not play the music
through the speaker, even after it's paired (linked).
3.) If you are pairing (linking) your computer to the JSB-550 using Bluetooth, you may need
to set the JSB-550 as your computer’s default sound device.
Note:
In power on mode, If no sound playback or paused by user for 15 minutes, unit will
turn into standby mode automatically for power saving.
Re-linking to a cell phone or Bluetooth device
If your cell phone or Bluetooth device is already paired with the JSB-550, but became
unlinked at some point, even with both Bluetooth devices turned on. You can re-link them by:
1. Press and hold the /PLAY/PAUSE button to re-link your cell phone. The Mode Indicator
LED will turn Turquoise and flash while linking.
2. Select the JSB-550 from the devices list on your cell phone for linking. The Mode Indicator
LED stops flashing and remains lit Turquoise if the JSB-550 and your cell phone have
been re-linked successfully.
3. You can also re-link the JSB-550 by using Bluetooth operation of your cell phone. Please
refer to operation manual of your cell phone for more information.