background image

 

12

 

 
 

 

TROUBLESHOOTING GUIDE

 

 

Symptom 

Possible Problem 

Solution 

AC Adaptor is not plugged into 
a wall outlet or the connector is 
not plugged into the power 
supply jack on the back of the 
unit. 

Plug the AC adaptor into a wall outlet and plug the 
connector into the supply jack on the unit. 

The unit does not 
respond (no power) 

Wall outlet is not functioning. 

Plug another device into the same outlet to confirm 
the outlet is working. 

Using no/wrong iPod® 
Adaptor. 

Make sure the dock insert is the proper fit for your 
iPod®. 

iPod® does not 
dock properly 

iPod® does not install properly.

Remove your iPod® from the dock and check for 
obstruction on the connectors in the dock and on 
your iPod®. Then reseat it in the dock. 

iPod® is not installed properly. 

Remove your iPod® from the dock and check for 
obstruction on the connectors in the dock and on 
your iPod®. Then reseat it on the dock. 

iPod® does not 
respond to the 
speaker system 

Your iPod® is locked up. 

Please make sure that your iPod® is working 
properly before docking into the unit. Please refer to 
your iPod® manual for details. 

iPod® is not installed properly. 

Remove your iPod® from the dock and check for 
obstruction on the connectors in the dock and on 
your iPod®. Then reseat it in the dock. 

iPod® does not 
charge up 

iPod® is locked up/ frozen. 
iPod® battery has problem. 

Please make sure your iPod® is working properly 
before docking into the unit. Please refer to your 
iPod® manual for details. 

AM band is too 
noisy 

The reception at the set 
location is poor. 

Slightly rotate the unit for the best reception. 

Volume level is set too high. 

Decrease the volume. 
If the iPod original sound source is of poor quality, 
distortion and noise are easily noticed with 
high-power speakers. Try a different audio source 
such as a music CD. 

Sound is distorted 

Sound source is distorted. 

If you are using an external sound source like older 
generation of iPod®, try reducing the output volume 
on the device itself. Also try turning bass boost OFF 
or change the EQ setting. 

Содержание JiMS-200














Отзывы: