Jensen JHD3000, Руководство пользователя

Страница: 4 / 9

- 5 -
- 6 -
If you have already set the Pre-Set memories to your favorite stations, activating
the Auto-Store Tuning feature will erase those stations and enter the new local
ones.This feature is most useful when traveling in a new area where you are not
familiar with the local stations. The program clear function is used during CD pla-
yer operation to clear any disc program tracks committed to memory using the
PMEM button.(Refer to item 24 )
13 .MODE SELECTOR (MODE)BUTTON
This button is used to select the radio or the CD player playback and AUX mode.
Each press of the button will select a different mode as indicated on the display
panel.During CD player operation,this button may be used to change to AUX or
Radio without ejecting the disc. The CDin indication will remain on the display
panel to show that a disc is still loaded in the unit. Press the button again to
return to radio mode.
14 .STATION PRE-SET MEMORIES
To set any of the 6 Pre-Set memories in each band,use the following procedure:
1.Turn the radio on and select the desired band.
2.Select the first station to be Pre-Set using the TUNE TRK +/- (manual mode)
or Auto-Store (AS) Controls.
3.Press the Pre-Set button to be set and continue to hold it in for approximately
2 seconds. The Pre-Set number (M1-6)will appear on the display panel, indic-
ating that the station is set into that Pre-Set memory positon. The station can
now be recalled at any time by pressing that button.
4.Repeat the above procedure for the remaining five Pre-Sets on that band and
for the other four bands on the unit.
15 .LIQUID CRYSTAL DISPLAY PANEL
The LIquid Crystal Display (LCD) panel displays the frequency, time, and activ-
ated functions.
NOTE :It is a characteristic of LCD panels that if subjected to cold temperatures
for an extended period of time, they may take longer to illuminate than under n-
ormal conditions. In addition, the visibility of the numbers on the LCD may slightly
decrease. The LCD read-out will return to normal when the temperature increas-
es to a normal range.
16 .DISC SLOT
Gently insert the disc into the slot (label surface facing up) until the soft load-
ing mechanism engages and pulls the disc in. :CD, total disc tracks and playing
time momentarily appear on the display, then CD in , the TRACK number (1)
and the elapsed playing time (00:00) of the disc are displayed.
CAUTION: This unit is designed for play of standard 5" (12cm) compact discs
ONLY. Do not attempt to use 3"(8cm)CD-Singles in this unit, either
with or without an adapter, as damage to the player and/or disc can
occur. Such damage will not be covered by the warranty on this pro-
duct.
17 .DISC EJECT( )
Disc play is stopped and the disc is ejected when the eject( )button is pre-
ssed. Radio operation will then automatically resume. If the disc is not remov-
ed from the unit within 15 to 20 seconds of being ejected, it will automatically
be reloaded into the unit to prevent it from being accidentally damaged (CDin
will appear on the display panel to indicate that a disc is loaded in the player).
The disc will not be played. Pressing the MODE button will reload the disc and
play it automatically. Press the MODE button again to stop disc play and choose
radio operation
18 .MANUAL UP/DOWN TUNING
(TUNE TRK+/TUNE TRK-)
Momentarily pressing and releasing either TUNE/TRK button will activate the
manual Tuning function, whereby FM stations may be selected in 200KHz inc-
rements, up or down, and AM station may be in 10KHz increments. Pressing
this button for 2s will activate the automatic seek. The radio will seek the ne-
xt station in the + or - direction and stop and remain at that frequency. During
the upward or downward seek operation, LOC (local) appears on the display
panel, and then disappears when a strong stereo station is encountered (ST
appears on the display).
19 .TIME/FREOUENCY SELECTOR (T/F)
During radio operation, press this button to show the frequency display on the
quartz clock, radio operation will continue uninterrupted. The time display will
return 5 seconds later and will remain until another band and/or frequency is
selected. The ferquency/band display will appear for approximately 5s, and
then revert to the time display as before.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS