10
PA Operation
•
Connect PA Microphone (JMICHFP) with a 4-PIN connector
to the 4-PIN socket on the rear of the unit.
•
The unit will automatically switch to PA mode when the
mic switch is pushed “ON”.
•
The PA output level can be adjusted using the or
– buttons (20, 19).
•
With radio power off, the radio will wake up when PA mic
button is pressed to make an announcement. Please note
that it will take a few seconds before the radio “wakes up”
and PA is active. Radio will return to the off state when the
PA mic is released.
TUNER OPERATION
1
16
17
15
14
13
12
11
10
2
3
4
5
6
7
8
9
20
19
18
PS AS
INFO
ENTER
TIMER
Select a Band
Press the
BAND/SCROLL
button (17) to change between FM1,
FM2, FM3, AM1 and AM2.
Manual Tuning
Press & hold the or buttons (6, 7) to seek stations up/
down step by step.
Auto Seek Tuning
Press the or buttons (6, 7) to automatically seek the next
or previous strong station.
NOTE: Seek tuning is not available for weather band channels.
Use the up or down tuning buttons to manually select any of
the seven available weather band channels.
Preset Stations
Six numbered preset buttons store and recall stations.
Store a Station
Select a station, then press and hold a preset button from
1 –
6
on the number buttons (11-16) for two seconds. The preset
number will appear on the LCD.
Recall a Station
Press a preset button from
1 – 6
on the number buttons to
select the corresponding stored station.
NOTE: Preset buttons are pre-assigned frequencies in weather
band mode.