16
OPERATION
16
Bluetooth
®
Operation
Before you can use a Bluetooth device, it must be paired
and connected. Make sure that Bluetooth is activated on
your device before you begin the pairing process. The unit
broadcasts the pairing signal constantly when no devices
are currently connected. Complete the pairing sequence
from your Bluetooth device. Refer to the owner's manual
for your device for more details.
The device name is "JENSEN JCR311"
The Bluetooth passcode "1234"
Note
: The unit can be in any mode of operation when
pairing is performed.
If a device is currently connected, press and hold to
disconnect the current device before a new device can be
paired. Then begin the pairing sequence from the new
Bluetooth device.
Most Bluetooth devices support the auto-connect
feature, and will connect automatically if the device is
in range when the unit is powered-on. If your device
was previously paired but does not connect, use these
instructions below.
• If your most recently connected Bluetooth device
becomes disconnected or does not reconnect, press and
hold from Bluetooth mode to reconnect your mobile
device.
• To connect a previously paired device that was not
recently connected:
1) Press and hold to disconnect any connected mobile
devices when Bluetooth is paired. Press and hold to
connect Bluetooth device again when Bluetooth is not
paired.
2) The paired device name will appear on the LCD once it
is connected.
3) Turn the
volume knob
to cycle through the list of
devices.
4) Press the volume knob to cycle through the list of
recent calls up to ten and select the phone number to
dial when Bluetooth is paired. NONE appears on the LCD
if there are no recent calls.
Press and hold for 3 seconds to disconnect a
connected device. The device will remain paired and
appear in the SEARCH menu, but not be connected.
Note:
Placing a phone call from your cell phone will also
initiate Bluetooth function.
Pairing a New Device
Pairing Additional
Devices
Connecting a
Paired Device
Disconnecting a Device
