background image

 

 

E-7

CD PROGRAMMED PLAY 
This function allows your favorite tracks to be played in a programmed sequence. 
1.  Set the Function Selector to the “CD” position and press the 

 

Button to turn the unit on.  

2.  Open the CD Door, insert a CD and wait until the total number of tracks on the CD is displayed.  
3.  Press the PROG Button once.  Program No, “01”, will be shown briefly and then changes to Track 

No. “00” and flash together with the Program Indicator, “PROG”, in the Display. 

4.  Press the                      Buttons to select the song to be programmed. 
5.  Press the PROG Button again to store your selection.  Program No. “02” will be shown briefly and 

resume to “00” and flash to prompt for another input. 

6.  Press the                   Buttons to select the next song to be programmed

 

  

and press the Program 

Button again to store your second selection. 

7.  You may repeat steps #3 - #5

 

  

to program as many as 20 tracks. If you attempt to program more than 

20 tracks, the Display will display flashing “01”. 

8.  To check the programmed tracks, press the PROG Button repeatedly. The Display will first show the 

PROGRAM No. and then the programmed track number in the programmed sequence. 

9.  Press         Button to start programmed play.  

After all the programmed tracks have been played the player stops but the program remains in 
the memory. 

Press the PROG Button and then the         Button to begin programmed playback again.   

10.  To resume normal playback, in “STOP” mode press the         Button. 
11.  To stop playing, press the STOP 

 

Button. 

12.  To turn the Player off, press the “OFF” Button. The POWER Indicator goes off. 
 
IMPORTANT 
Always turn off the power when the unit is not in use in order to extend the battery life. 
 
 

RADIO RECEPTION 

1.  Set the Function Selector to “RADIO” and set BAND Selector (# 14) to “AM” or “FM” for the desired 

radio band. 

2. Press 

the 

 

Button to turn unit on. The POWER Indicator lights up. 

3. 

Turn the TUNING Control to obtain the desired radio station. 

4. 

Adjust the VOLUME Control to obtain the desired sound level. 

5. 

When you wish to turn off the Radio, press the “OFF” Button. The POWER Indicator goes off. 

 
TIPS FOR BEST RADIO RECEPTION 
The unit has built-in FM and AM antenna. To obtain the best reception, you may have to move or slightly 
rotate the unit.  
 
 

USING HEADPHONES  

Inserting the plug of your headphones (not included) into the 

HEADPHONE

 Jack will enable you to listen to 

the CD or Radio in private. When using headphones, the Speakers will be disconnected automatically. 
 
READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES
 
1. 

Avoid extended play at very high volume as it may impair your hearing. 

2.  If you experience ringing in your ears, reduce the volume or shut off 

your unit. 

3.  Do not use while driving a motorized vehicle.  This is dangerous and 

also illegal in some states. 

4.  Keep the volume at a reasonable level even if your headset is an   

open-air type designed to allow you to hear outside sounds.  Please 
note excessively high volume may still block outside sounds. 

Содержание JCR-540











Отзывы: