E-6
POWER SOURCE (AC ADAPTOR ONLY)
The JCR-206 is powered by an external 120V AC adaptor with an output of
AC ~ 5V / 400mA.
The unit is also equipped with a battery back-up system for the clock that is powered by
2 x ‘AAA’ (UM-4) batteries (Not included).
POWER CONNECTION
1. Plug the cord of the power adaptor into the AC IN JACK (#11) located on the back
of the JCR-206.
2. Plug the power adaptor into a household wall socket. The unit is powered up and in
standby mode when you see the display turn on and begin flashing.
Battery Back-up system
•
The radio is equipped with a battery back-up system. It requires 2 x ‘AAA’ (UM-4)
batteries (Not included).
•
Open the BATTERY DOOR (#12) on the back of the unit. Insert the batteries into
the battery compartment and make sure the positive and negative (+ or -) sides of
the batteries are in contact with the corresponding terminals in the battery
compartment. Replace the BATTERY DOOR (#12).
•
If a power outage occurs, the unit automatically switches to the battery power
supply and keeps the clock settings.
•
When replacing the battery, do not disconnect the power adaptor. Otherwise, all
clock and alarm settings will be lost.
Note:
The unit will still operate without the batteries installed, but the time and alarm settings
will be lost and have to be reset in the event of a power interruption or failure.
CAUTIONS:
1.
Do not mix old and new batteries.
2.
Only use good quality/name brand batteries.
3.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
1.5V AAA
1.5V AAA
BACK
INSTALL
BATTERIES
