E
‐
8
for example, it stops on 88.9 MHz instead of 88.8 MHz, use the manual
tuning method to “fine tune” to the exact frequency of the desired station.
TIPS FOR BEST RADIO RECEPTION
AM
- The AM antenna is built inside the radio. If AM reception is weak, change
the position of the unit until the internal antenna picks up the strongest signal.
FM
- If FM reception is weak, fully extend the EXTERNAL WIRE ANTENNA and
vary the position and location of the antenna until you find the strongest signal.
RADIO STATION PRESETS
The unit allows you to store up to 10 AM and 10 FM stations for easier recall at any
time.
SETTING THE PRESET STATIONS
1. Tap the RADIO ON button to turn on the radio.
2. Tap the MODE button to select the AM or FM radio mode.
3. Tune to the radio station you want to store in memory by using manually tune or
automatically search method.
4. Press and hold the PRESET button, the preset channel number “P01” appears
on display and blinks.
5. To select desired preset station number, tap the /- buttons.
6. To confirm preset location, tap the PRESET button.
7. Repeat steps 3 to 6 to store other stations if necessary.
Notes:
There is about a 10 second delay when programming, after 10 seconds, the
unit will automatically switch back to normal tuner mode if you have not tapped
the PRESET button.
You can replace a preset station by overwriting and storing the new station
frequency in its place.
RECALLING A PRESET STATION
1. Tap the RADIO ON button to turn on the unit.
2. Tap the MODE button to select AM or FM radio receiving mode.
3. To select desired preset channel, tap the PRESET button repeatedly.
ALARM OPERATION
SETTING THE WAKE UP TIME
1. In unit standby mode, press and hold the
ALARM 1 or
ALARM 2 button,
alarm clock display will start flashing.
2. Tap the HOUR button repeatedly to set alarm hour. Press and hold the button
for fast advance setting.
